Complete Safety Suite Package

14 Hours | Online HD Video Course 

  • 29 CFR 1926 Confined Spaces – 3 hour
  • Powered Industrial Trucks and Aerial Lifts – 2 hour
  • Hot Work – 1 hour
  • 29 CFR 1926 Stairways and Ladders – 1 hour
  • Silica Safety – 1 hour
  • Respiratory Protection – 1 hour
  • Hazard Communication – 1 hour
  • Fall Protection – 1 hour
  • Personal Protective Equipment – 1 hour
  • Job Safety Analysis- .5 hour
  • Controlling Hazardous Energy – .5 hour
  • Fire Safety – .5 hour
  • Bloodborne Pathogens – .5 hour
  • Tool Box Talks

$219.00

Description

 

Confined Spaces

Instructor:  Josh Francis

29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.

This Course Covers:

  • Scope & Definitions
  • General Requirements
  • Permits and the process
  • Training
  • Rescue and Emergency Services

 


Powered Industrial Trucks and Aerial Lifts

Instructor:  Nelson Gelinas

1. Powered Industrial Trucks (55 Minutes) This video training program covers the basic use of powered industrial trucks (fork lifts), and includes specific requirements regarding proper operation, hazards, inspections and maintenance of these useful, but potentially dangerous vehicles in the workplace.

2. Aerial Work Platforms of Lifts (45 Minutes) This course highlights standards related certification, fall protection, safety hazards, operation and overall best practices for using aerial lifts or platforms.

This course covers:

Powered Industrial Trucks

  • Certification and Training
  • What makes a fork lift different?
  • Inspections
  • Safe Travel Procedures
  • Parking
  • Tipovers
  • Stability Triangle
  • Visibility
  • Ramps and Loading Docks
  • Refueling
  • Picking up a Pallet

Aerial Work Platforms of Lifts

  • Purpose and Types
  • Certification
  • Fall Protection
  • Energized Lines and other Hazards
  • Inspections
  • Operating the Lift

 


Hot Work

Instructor:  Nelson Gelinas

Hot work is any activity or process that creates flames, generates sparks, or heat, and includes welding, grinding, cutting, brazing etc, and any similar applications producing or using sparks, flame or heat. The risk with hot work is high because it introduces a hazard—an ignition source. This course will focus on the various steps to take to ensure hot work is performed in a safe manner.

This Course Covers:

  • Hot Work Permit
  • Personal Protective Equipment
  • Fire Watch
  • Tank Storage
  • Hot Work Area
  • Other Common Hazards
  • Hexavalent Chromium

 


29 CFR 1926 Stairways and Ladders

Instructor:  Joshua Francis

This subpart applies to all stairways and ladders used in construction, alteration, repair (including painting and decorating), and demolition workplaces covered under 29 CFR part 1926, and also sets forth, in specified circumstances, when ladders and stairways are required to be provided.

This Course Covers:

  • Scope, Application, and Definitions Applicable to this Subpart
  • General Requirements
  • Stairways
  • Ladders
  • Training Requirements

 


Silica Safety

Instructor:  Josh Francis

Construction workers are exposed to respirable crystalline silica in over 600,000 workplaces each year. OSHA estimates that more than 840,000 of these workers are exposed to silica levels exceeding the Permissible Exposure Limit (PEL). This one-hour course reviews OSHA regulations and the safety codes surrounding silica safety.

This course covers:

  • Introduction to Silica
  • PEL Limits
  • Employer Responsibilities
  • Respiratory Protection
  • Respiratory Protection
  • Exposure Control Methods

 


Respiratory Protection Course

Instructor:  Nelson Gelinas

Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of deaths and thousands of illnesses annually. This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.

This Course Covers:

  • Identifying the hazards
  • Training
  • Medical evaluation questionaire
  • Fit testing
  • Fit check
  • Maintenance
  • Proper storage
  • Cartridges/gaskets
  • Types
  • Correct cartridges for toxin
  • Facial hair

 


Hazard Communication

Instructor:  Nelson Gelinas

In order to ensure chemical safety in the workplace, information about the identities and hazards of the chemicals must be available and understandable to workers. This course will outline employee Right-to-Know information, the Global Harmonizing System, Safety Data Sheets, and labels.

This Course Covers:

  • Employee Right-to-Know
  • Global Harmonizing System
  • Reading the Label
  • HMIS and NFPA Systems
  • Safety Data Sheets

 


Fall Protection Course

Instructor:  Nelson Gelinas

Falls are one of the most common types of serious injuries and deaths. Employers are responsible for maintaining a safe working environment, but when fall protection devices are impractical, personal fall protection equipment may be used. This course outlines the standard equipment use, maintenance and inspection requirements for harnesses, lanyards, lifelines, tethers and more.

This Course Covers:

  • Choosing the right equipment:
  • Positioning devices, rescue/retrieval devices
  • Harnesses
  • Lanyards
  • Anchorage
  • Rescue plans

 


Personal Protective Equipment Course

Instructor:  Nelson Gelinas

Personal protective equipment, commonly referred to as “PPE”, is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This course will outline the most common forms of PPE used in the workplace.

This Course Covers:

  • Purpose
  • Hazard Assessment form
  • Hard Hats
  • Eye Protection
  • Hearing Protection
  • Foot Protection
  • Gloves

 


Job Safety Analysis

Instructor:  Nelson Gelinas

A job hazard analysis is a technique that focuses on job tasks as a way to identify hazards before they occur. It focuses on the relationship between the worker, the task, the tools, and the work environment. Ideally, after you identify uncontrolled hazards, you will take steps to eliminate or reduce them to an acceptable risk level. This course outlines the basic steps of a Job Safety Analysis.

This Course Covers:

  • What is a JSA?
  • Why Have One?
  • Parts of the form
  • Task
  • Hazard
  • Control

 


Controlling Hazardous Energy Course

Instructor:  Nelson Gelinas

This training program covers Lockout/Tagout procedures for the use of appropriate lockout or tagout devices designed to isolate or disable equipment in order to prevent unexpected start up or release of stored energy, causing injury to employees.

This Course covers:

  • Importance of lockout/tagout
  • Employees:
  • Energy sources disabled:
  • Tags
  • Group lockouts
  • Stored energy release
  • Account for tools and replace guards

 


Fire Safety Course

Instructor:  Nelson Gelinas

This course highlights standards related to fire safety, including prevention, types of fires, extinguishers and best practices and covers:

  • Prevention
  • Extinguishers
  • Operating extinguishers

 


Bloodborne Pathogens 

Instructor:  Nelson Gelinas

Bloodborne pathogens are infectious microorganisms in human blood that can cause disease, and be easily passed from one person to another. This course will outline the basic precautions every person should observe when working in a workplace where accidents can occur.

This Course Covers:

  • Introduction
  • Other Potentially Infectious Material
  • 5 Primary BBBs
  • Universal Precautions
  • PPE
  • Clean-Up/Disposal

 


Tool Box Talks

This section will give you access to 24 Tool Box Talks


 

If you have any questions
Please call us at 1-800-727-7104 | Monday-Friday | 8am-8pm
Or send an email to info@onlinecti.com. Email responses will be returned promptly within one business day.

Attendance, Privacy and Refund Policy