Construction Health and Safety Compliance Part I | Alaska Approval #17175

$99.00

8 Business Credit Hours | Online Video Course | Nelson Gelinas & Joshua Francis
This course focuses on controlling hazardous energy, fall protection and maintaining a safe working environment, fire safety, hazard communication to ensure chemical safety in the workplace, personal protective equipment, respiratory protection, silica safety and stairways and ladders.

SKU: 4972 Category: Tag:

Description

Construction Health and Safety Compliance Part I 8HR CE 


 

COURSE DESCRIPTION

Confined Spaces. (150 Minutes) 29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.

Fall Protection. (60 Minutes) Falls are one of the most common types of serious injuries and deaths. Employers are responsible for maintaining a safe working environment, but when fall protection devices are impractical, personal fall protection equipment may be used. This course outlines the standard equipment use, maintenance and inspection requirements for harnesses, lanyards, lifelines, tethers and more.

Hazard Communication. (60 Minutes) In order to ensure chemical safety in the workplace, information about the identities and hazards of the chemicals must be available and understandable to workers. This course will outline employee Right-to-Know information, the Global Harmonizing System, Safety Data Sheets, and labels.

Personal Protective Equipment. (60 Minutes) Personal protective equipment, commonly referred to as “PPE”, is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This course will outline the most common forms of PPE used in the workplace.

Respiratory Protection. (60 Minutes) Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of deaths and thousands of illnesses annually. This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.

Silica Safety. (60 Minutes) Construction workers are exposed to respirable crystalline silica in over 600,000 workplaces each year. OSHA estimates that more than 840,000 of these workers are exposed to silica levels exceeding the Permissible Exposure Limit (PEL). This one-hour course reviews OSHA regulations and the safety codes surrounding silica safety.


Confined Spaces

  • 1926.1201 Scope
  • 1926.1202 Definitions
  • 1926.1203 General Requirements
  • 1926.1204 Permit-required Confined Space Program
  • 1926.1205 Permitting Process
  • 1926.1206 Entry Permit
  • 1926.1207 Training
  • 1926.1208 Duties of Authorized Entrants
  • 1926.1209 Duties of Attendants
  • 1926.1210 Duties of Entry Supervisors
  • 1926.1211 Rescue and Emergency Services
  • 1926.1212 Employee Participation
  • 1926.1213 Provision of Documents to Secretary

Fall Protection

  • Choosing the right equipment:
    • General Industry
    • Construction Trades
  • Positioning devices, rescue/retrieval devices
  • Harnesses
    • inspect, ANSI
    • proper fit
    • features
  • Lanyards
    • inspect
    • locks and rivets
    • features
    • Pendulum Effect
  • Anchorage
    • requirements
    • best practices
  • Rescue plans
    • suspension trauma
    • best practices
    • trauma straps
    • tethers

Hazard Communication

  • Employee Right-to-Know
  • Global Harmonizing System
    • Pictograms
    • Labels
    • Containers
  • Reading the Label
  • HMIS and NFPA Systems
    • Numbering scale
    • Colors
  • Safety Data Sheets
    • How to Read
    • PEL/STEL
    • Parts of the SDS

Personal Protective Equipment

  • Purpose
  • Hazard Assessment form
  • Hard Hats
    • ANSI approval Z89 rating
    • class and type
    • accessoriess
  • Eye Protection
    • ANSI Z87 rating
    • types
  • Hearing Protection
    • ear plugs
    • muffs
  • Foot Protection
    • types
  • Gloves
    • types

Respiratory Protection

  • Identifying the hazards
  • Training
  • Medical evaluation questionnaire
  • Fit testing
    • positive/negative pressure
  • Fit check
  • Maintenance
  • Proper storage
  • Cartridges/gaskets
  • Types
    • half-face
    • full-face
  • Correct cartridges for toxin
  • Facial hair

Silica Safety

  • Introduction to Silica
  • PEL Limits
  • Employer Responsibilities
  • Respiratory Protection
  • Respiratory Protection
  • Exposure Control Methods

Course instructors will be available by email or telephone between 9am and 5pm Eastern Standard Time. They will assist you with questions regarding course content.

If you have any questions, please call us at 1-800-727-7104 or send an email to info@onlinecti.com. Email responses will usually be returned promptly, but guaranteed within one business day.

Student policies and procedures are always available by going to www.licensetobuild.com and scrolling to the bottom of the page (See Attendance, Privacy and Refund Policy).