Construction Health and Safety Compliance Part I | Rhode Island Approval #005-009

$89.00

5 Credit Hours | Online HD Video Course
This course covers requirements for Confined Spaces and procedures to protect employees where confined spaces may occur at a worksite, respiratory protection and the dangers of not using a respirator and Silica Safety.

Description

Construction Health and Safety Compliance 5HR CE Part I

Instructors:  Nelson Gelias & Joshua Francis


 

COURSE DESCRIPTION

1. Confined Spaces. (160 Minutes) 29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.

2. Respiratory Protection. (50 Minutes) Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of deaths and thousands of illnesses annually. This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.

3. Silica Safety. (60 Minutes) Construction workers are exposed to respirable crystalline silica in over 600,000 workplaces each year. OSHA estimates that more than 840,000 of these workers are exposed to silica levels exceeding the Permissible Exposure Limit (PEL). This one-hour course reviews OSHA regulations and the safety codes surrounding silica safety.


Confined Spaces

  • 1926.1201 Scope
  • 1926.1202 Definitions
  • 1926.1203 General Requirements
  • 1926.1204 Permit-required Confined Space Program
  • 1926.1205 Permitting Process
  • 1926.1206 Entry Permit
  • 1926.1207 Training
  • 1926.1208 Duties of Authorized Entrants
  • 1926.1209 Duties of Attendants
  • 1926.1210 Duties of Entry Supervisors
  • 1926.1211 Rescue and Emergency Services
  • 1926.1212 Employee Participation
  • 1926.1213 Provision of Documents to Secretary

Respiratory Protection

  • Identifying the hazards
  • Training
  • Medical evaluation questionaire
  • Fit testing
    • positive/negative pressure
  • Fit check
  • Maintenance
  • Proper storage
  • Cartridges/gaskets
  • Types
    • half-face
    • full-face
  • Correct cartridges for toxin
  • Facial hair

Silica Safety

  • Introduction to Silica
  • PEL Limits
  • Employer Responsibilities
  • Respiratory Protection
  • Respiratory Protection
  • Exposure Control Methods

Customer service will be available by email or telephone between 8am and 6pm Eastern Standard Time. They will assist you with questions regarding course content.

If you have any questions, please call us at 1-800-727-7104 or send an email to info@onlinecti.com. Email responses will usually be returned promptly, but guaranteed within one business day.

Student policies and procedures are always available by going to our website and scrolling to the bottom of the page (See Attendance, Privacy and Refund Policy).

Live Chat