47 Hour Complete Building Inspector Course Package | Michigan Code Official

Fulfills all 47 hours of continuing education for Building Inspectors.

  • Administrative:  4 hrs
  • Communication:  1 hr
  • Technical:  24 hrs
  • Specialty:  18 hrs
  • Free Social Media Marketing for Construction Trades

This package provides 4.7 ICC CEU.




  • 8-hour  Overview of Building Trades  #CP-21-00062 (8 hr Specialty)
  • 6-hour Technical I: Building Construction 2015 MRC #CP-21-00064  (6 hr Technical)
  • 6-hour Technical II Building Construction 2015 MRC #CP-19-00023 (6 hr Technical)
  • 6-hour  ANSI A117.1-09  #CP-21-00058 (6 hr Technical)
  • 6-hour  Residential Code Review  #CP-18-00220 (6 hr Technical)
  • 6-hour  Building Green  #CP-21-00057 (6 hr Specialty)
  • 4-hour  Building Department Administration #CP 21-00015 (4 hr Administrative)
  • 2-hour  Drier By Design – Designing to Keep Water Out  #CP-19-00021 (2 hr Specialty)
  • 2-hour  Successful Use of Pre-Engineered Metal Buildings  #CP-19-00020 (2 hr Specialty)
  • 1-hour  Positive Communication Strategies #CP-21-00063 (1 hr Communication)
  • Free Social Media Marketing for Construction Trades


Code Official Overview of Building Trades

Instructor:  Scott Corbat

This eight-hour course provides an overview of building trade skills. This course outlines the fundamental requirements involved in residential construction or remodeling through text, integrated videos, diagrams, and slides.

This course applies 8-Hours towards Specialty credit.

This course covers:

  • Site Work
  • Concrete
  • Foundation Construction
  • Framing
  • Roofing
  • Siding
  • Trim
  • Masonry
  • Plan Reading

Code Official Technical I: Building Construction 2015 MRC

Instructor: J. MacDowell

This fully narrated course is a review of building construction and techniques, including the related 2015 Michigan Residential Code covering the following topic areas: Footings and Foundations, Concrete, Carpentry, and Masonry.

This course covers:

Footings and Foundations 2015 MRC Chapter 4 (60 Minutes)

  • Installation R402 -R406
  • Construction Requirements
  • Footings R403
  • Foundation Walls R404
  • Anchoring R403.1.6

Concrete 2015 MRC Chapter 4 (70 Minutes)

  • Portland Cement
  • Flatwork R506
  • Formwork

Carpentry 2015 MRC Chapters 5 and 6 (110 Minutes)

  • Bracing and Bridging
  • Tables
  • Sole, Top Plate, Rim Joists
  • Notching and Boring
  • Floor Framing R502
  • Wall Framing Chapter 6
  • Roof Framing Chapter 8
  • Openings
  • Stairs Chapter 3
  • Decks Chapter 5
  • Finish Carpentry
  • MI Barrier Free Design

Masonry Chapters 4, 6, 7, 10 (70 Minutes)

  • Mortor and Grout R703.8, R606
  • Brick R703.8
  • Stone R703.12
  • Concrete Block R404, R606
  • Details R703.8
  • Reinforcement R606
  • Flashing R703.8
  • Fireplace and Chimney Construction Chapter 10, R1001

Code Official Technical II Building Construction 2015 MRC

Instructor:  J. MacDowell

This fully narrated course is a review of building construction and techniques, including the related 2015 Michigan Residential Code.

This course covers:

  • Covering Materials
  • Valleys
  • Ventilation R806
  • Reroofing R908
  • Insulation
  • Ventilation
  • Windows, Doors and Skylights R609
  • Siding Installation R703
  • Interior & Exterior Finishes R702
  • Specialties

Code Official ANSI A117.1-09

Instructor:  J. MacDowell

The ANSI A117.1-09 standards set minimum requirements for newly designed and constructed, or altered state and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities. This course provides an overview of these requirements with instructor commentary to highlight relevant topics.

After completing this course, participants will be able to:

  • Be able recognize what interior and exterior components can, and should comply with standards.
  • Identify the requirements for proper maneuvering space, clearance and accessible routes.
  • Outline at least one design strategy based on standards for the construction of either a public or private building.
  • Summarize the options available to the design or building professional when designing a facility per the requirements of the standards.

Code Official 2015 Residential Code Review

Instructor:  J. MacDowell

This six-hour course is a review of the codes required for residential construction. This course focuses on the 2015 Michigan Residential Code book and the latest changes. The 2015 MRC is a comprehensive stand-alone residential code that establishes minimum requirements for one- and two-family dwellings and townhouses, with the purpose of safeguarding the health and safety of the public.

This 6-Hour course applies six hours towards Technical credit.

This course covers:

  • Codebook Basics
  • Scope & Application
  • Building Planning
  • Foundations
  • Floors
  • Wall Construction
  • Roof/Ceiling Construction
  • Chimneys and Fireplaces

Code Official Building Green

Instructor:  Scott Corbat

This course will bring attention to methods of green building that allow homes to have less impact on the environment while providing a great economic benefit to the homeowner. Students will learn the importance of incorporating energy-efficiency into their building projects.

This course covers

  • Resource and Energy Efficient Buildings
  • Heat Transfer
  • Air Infiltration
  • Residential Energy Codes
  • Compliance Methods
  • Advanced Framing Techniques
  • Insulated Headers
  • Raised Heel Trusses
  • Frost Protected Shallow Foundations
  • Airtight Drywall Approach
  • Insulation
  • Cellulose
  • Spray Foam Insulation
  • Radiant Barriers
  • Solar Heat Gain
  • Lighting
  • HVAC
  • Geothermal Systems
  • Wind Turbines
  • Waste Management
  • Solar Photo-voltaic Products

Code Official Building Department Administration

Instructor:  Larry Rospierski

Building departments are complex and widespread. For timely and effective operations the department must have clear guidelines to follow and be led by a strong administrator. This course describes the duties of a Building Official, the characteristics of a successful manager, procedures for plan review and permits, advice for inspections, and considerations on ways to best support your community.

After completing this course participants will be able to:

  • Outline the duties of a Building Official
  • Implement the required procedures for plan review and permitting
  • Describe inspection protocols

This Course Covers:

  • Introduction to History, Societies, ICC, Enforcement and Challenges
  • The Building Official
  • Tools and Personnel
  • Best Practices
  • Effective Permit Processing
  • Inspection Protocol
  • Permit Issues
  • Special Considerations

Code Official Drier By Design – Designing to Keep Water Out

Instructor:  Paul Spite

With erosion paths cut into solid rock as solid evidence, water in various forms contains immense power to eat away or destroy whatever is in its path. Whether it takes a year, two hundred or ten thousand, without intervention, water can and will destroy our man-made structures. Once a problem develops that opens a pathway for intrusion, one rainy season can render a building unsuitable for human use.

We have the knowledge and tools to combat such destruction of our structures. We implement counterattacks in the design stage, during construction, and afterwards with proactive maintenance, but the battle against water begins in the design phase.

Moisture resistance principles and methods are discussed in a systematic fashion, as in one building system at a time. Fundamentals are first covered, including basic principles of water behavior and the multiple paths it takes while invading buildings. A thorough knowledge of how destruction begins and escalates drives the known design principles and material decisions used to stop such migration. Practical solutions are then discussed in detail.

The discussion is needed. The physical price tag for both our structures and their occupants is too high to allow water free entry into our occupied spaces.

This course teaches the following specific knowledge and skills and covers:

  • A basic understanding of how water moves, migrates, and behaves
  • Typical sources of excess moisture in our built environments
  • Proactive prevention of unwanted moisture through planning and design
  • Methods used during construction to prevent the intrusion of water
  • Post-construction prevention of leakage by building envelope inspection
  • Common points of failure through which water can gain entrance
  • Prevention of water intrusion through control of condensation
  • Glossary of Terms Regarding Water Intrusion
  • Water Behavior
  • Moisture Problems
  • Sources of Water
  • Water and Building Components
  • Moisture from Plumbing Leaks, HVAC Systems, Ventilation Systems, and Condensation
  • Tightening the Envelope
  • Vapor and Air Retarders
  • Combatting Negative Air Pressure

Code Official Successful Use of Pre-Engineered Metal Buildings

Instructor:  Wayde Hoppe

This course will cover the advantages and disadvantages of using a pre-engineered metal building and why PEMB’s are economical. We will examine what needs to be considered when designing the foundations, building envelope, building systems, industrial equipment as well as code considerations. This lesson should equip the designer and builder to know the basic facts about Pre-Engineered Metal Buildings.

After completing this course, you will be able to:

  • Outline the advantages and disadvantages of Pre-Engineered buildings
  • Identify the code requirements related to bearing capacity of foundations and slabs
  • Describe hazardous occupancies and control areas that are often found in this type of structure
  • Summarize the code considerations and issues related to special industrial construction

This course covers:

  • Foundations
  • Equipment
  • Systems
  • Envelope
  • Code
  • Special Industrial Issues
  • Geology
  • Ground Water
  • Grounding
  • Repairs
  • Decorative Shapes
  • Deferred Submittals

Code Official Positive Communication Strategies

Instructor:  J. MacDowell

As a building official it is important to have strong interpersonal and communication skills that will foster effective, cooperative working relationships with city staff members, property owners, the building and development community. Very often, a building official functions as an overall office manager, planning and assigning work, and providing guidance and training clerical and technical staff. This one-hour course outlines some of the strategies used to create a positive work environment.

This 1-Hour course applies one hour towards Communication credit.

This course covers:

  • Conflict
  • Listening Skills
  • Body Language
  • Negotiating
  • Workplace Culture

Social Media Marketing for Construction Trades

Learn the ins and outs of social media marketing from experts that work in both social media and the construction industry. Use these tools and tricks to upgrade your personal and professional profiles, drive leads, and increase business.


If you have any questions
Please call us at 1-800-727-7104 | Monday-Friday | 8am-8pm
Or send an email to Email responses will be returned promptly within one business day.

Attendance, Privacy and Refund Policy